Thursday, May 27, 2010

Pipe Organ Progress Report

A few entries ago we posted news about the pipe organ that I'm presently building in my shop at home, where I built all the exhibits I contribute to Mindport.

Things are moving forward slowly. All 32 pipes are finished and laid out on the floor, more or less in the pattern they will be finally mounted. They'll be spaced out wider than you see them here, and mounted in two tiers, since their tone is affected by anything spaced too close to them.

Presently I'm working on the keyboard. Initially I'd intended to build all the keys from scratch, but after building the first key I thought- there must be a better way. So I went searching on eBay and came up with a set of keys salvaged from an 1888 vintage Weaver Organ, made by a now-defunct company that was originally based in York, PA. The set cost me $50 and will save literally weeks of work. Well worth the investment. Here's a picture of the inscription on one of the keys:


Still, the keyboard is proving to be a challenge. Devising a mounting scheme and installing the keys requires quite a degree of precision in order to get the spacing and alignment even. To add to the challenge, the keys are not perfectly uniform, so they'll need to be fudged a bit by sanding them here and there, and bending the pins that hold them in position once they're all in place.

The keys will be mounted on top of an airtight pressurized box, the "wind chest." Inside will be 32 "flapper valves" connected by thin wires to the ends of the keys. When you press a key, it lifts a small piece of wood from atop a hole leading to a tube, through which the pressurized air then flows to the appropriate pipe. In the photo below, all the white keys are mounted and now it remains to repeat the process with the black ones.



Of course the pressure in the wind chest has to stay constant no matter how many pipes are sounding, otherwise the tones would not be consistent, since the pitch and timbre change slightly according to pressure. Hence a device is necessary to accomplish that end. The air that drives the organ will be supplied by a blower whose output is funneled into a pressure regulator consisting of a diaphragm and a valve. As the pressure in the wind chest decreases with more pipes sounding, the diaphragm actuates a valve allowing more air to be admitted from the blower to compensate.

There's quite a bit to do yet on this project. As with nearly everything I build, the job turns out to be bigger than I anticipated. I'm glad that I opted to keep this instrument of minimal size, with only 32 notes. Once I do 32 of any part I'm grateful not to face another dozen or so. Also, as the notes become lower in pitch, the pipes become so large that they require a lot of expensive maple, not to speak of becoming physically unwieldy to build in my very small workspace. As you go farther up the scale, the pipes require more and more precision in order to arrive at proper pitch. So this is an optimum range for an instrument if it's required to be of manageable size and cost.

It's probably fortunate that previous to starting such projects I keep myself in denial about what will be involved. Otherwise it I might think twice about starting at all!

Kevin Jones

Friday, May 14, 2010

In Praise of Poetry


Canned Peaches for Snack; 360; Legos; My Room; Too Short a Ride; The Squid; Orange; Parking Lot; Crushed; Madre Mia; No; Short Sexy Season; Flight, and 413 others.  Paper, ink.  Various dimensions.  

 Our front window currently houses all 426 entries from this year's Sue C. Boynton Poetry Contest.  As I come in to work, I stop and read a few poems before heading up the stairs.  It's heartening to imagine all 426 individuals taking the time to craft these small windows into a moment, a place, a feeling, a person- and then offering them to us freely. 

Look for the winning poems from the 2010 contest inside WTA buses, and outside the walk leading to the library.  Poetry Walk, a collection of the winning poems from the past five years, is on sale at Village Books.  Proceeds help insure the longevity of the Sue C. Boynton Poetry Contest.

Judging for the 2011 contest will begin next March, so now's the perfect time to get writing!

Friday, May 7, 2010

Quote of the Day

"This often happens in math and the sciences - problems that you solve for aesthetic value only, to create something beautiful- turn out to have an application in the real world.  As weird and surprising at it may sound, origami may someday save a life." 
-Robert Lang, origami pioneer

It turns out that some of the same folding technology used to create objects like this:


...can also be used to create heart stents, airbags, and enormous telescopes.

To hear Robert Lang explain how math and engineering principles are being used to create new kinds of origami click here.








Thursday, April 29, 2010

Tetrahedra* Are Us

From this:


To this: 


On one of his forays through Western Washington University's library, Exhibits Manager Bill Lee happened upon a series of books by Bradford Hansen-Smith.  (Hansen-Smith explores folding the circle with a passion and determination I doubt is matched by many others and has created a number of texts that provide instructions for creating an array of fascinating objects.)  Being a math enthusiast, Bill checked out one of Hansen-Smith's books and brought it to Mindport, leading a group folding effort that has resulted in the pyramid pictured above and a few more like it.  For now, the folding continues up in the offices, but ultimately we expect to have a finished exhibit down on the floor.  

If you're interested in exploring the folding of the circle before then, see Bradford Hansen-Smith's website www.wholemovement.com

*A tetrahedron is a kind of polyhedron and is one of the five Platonic solids.
 


Friday, April 2, 2010

Get Your Creature On

Our current window features the froggy pictured above, a lovely wearable sculpture created by Mindport staff member Carol Oberton for the Bellingham Procession of the Species, a parade celebrating creativity, community, and our connection with nature.

It’s April 2, which means that Bellingham’s Seventh Annual Procession of the Species is now less than a month away.

Carol, one of the creative prompters of the Bellingham Procession from its inception in 2004, has been showing up at Mindport lately with large insect heads constructed from old plastic take-out containers, plumbing bits she’s found in the recycling bins here, and cast-off black mesh.  If you’re bored with staff meetings, try having someone come with an oversized beetle head for everyone to try on.  Works wonders!  (Actually, we are never really bored in Mindport staff meetings – it’s the only time most of us are in the building in the same time, and we have a good time checking in with each other.) 

Anyhow, Carol, who’s been both amphibious and crustaceous in the parade, and the rest of the Procession collaborators invite everyone to join in the fun.  There are Procession workshops every Saturday in April to help you get ideas for and construct banners, creepy creatures, stroller beasts, heads, tails, masks, BIG puppets, and the like.  The workshops are held at the Environmental Learning Center, 514 West Holly and are free and open to all.  Since there are only three simple rules to follow: no motorized vehicles, no live animals, and no words written or spoken, you can really let your imagination go.  Check out the Procession web site for more details: www.bpots.org.  

Once you’ve got yourself ready, just line up Saturday, May 1 at 3:30 behind the library.  You’ll march through the streets with your fellow creatures and wind up at the ending celebration held in Maritime Heritage Park.  We’ll see you there. 

The Bellingham Procession of the Species is a collaboration of the City of Bellingham Parks and Recreation Department and Start Here Community Arts. 

Wednesday, March 24, 2010

More on "Vintage" Technology

Lately we've been conducting an appreciation of the "obsolete" technologies of earlier eras. I've often noted the unfortunate fact that the "guts" of modern electronic technology are so microscopic that their physical function is no longer visible. The air-driven pipe organ mentioned in an earlier entry will provide contrast to modern electronic instruments in which micro-electronics have replaced large-scale physically functional components that tell obvious stories about how an instrument operates. My desire with that project is to call attention to the elegant simplicity of such instruments as they existed for hundreds of years previous to the modern era.

The telephone system is another technological artifact whose operating components have become invisible. Previous to our electronic era, this was not the case. The basic switching component of the phone system, before our contemporary push-button dialing appeared on the scene, was a special relay, which you can see pictured above. This device will appear in a future exhibit at Mindport. Don't hold your breath on this, however, because I still have two or three months to go before the pipe organ will be complete and ready for our growing gallery of musical instruments.

My thanks to our Exhibit Manager, Bill Lee, for chasing down this telephone relay, and a second unit of a different style that will also find its way into the new exhibit as we presently envision it.

-Kevin Jones

Friday, March 12, 2010

What's Been Happening at MP (Lately)

Looking over our introduction to this blog, I realized that we promised to keep readers apprised of what’s happening at MP “right now.”  In practice, this has turned out to be primarily keeping readers apprised of some of what we’re reading and thinking “right now,” so this week I’ll turn my attention to less strictly cerebral goings on.  Here’s the rundown of the last week or so.  

Last Friday Mindport housed “Speak Easy 3,” an evening of poetry organized and hosted by Luther Allen.  Five regional poets, Susan J. Erickson, Kari Galbraith, Christine Kendall, David M. Laws, and Oliver de la Paz read selections from their work to a full – and appreciative - house.  Look for “Speak Easy 4” in late spring or early summer. 

The Underwood typewriter is back on the floor after receiving a resurfaced platen (otherwise known as the roller) from a company in Pennsylvania.  The platen provides a backing for the type as it hits the paper.  If the rubber around the platen becomes hard and brittle, then the type doesn’t hit the paper in a consistent manner, resulting in uneven print.  Our free Underwood typewriter (courtesy of the alley) now has a price tag of $95 (not counting the labor hours it took to restore it), but everything typed on it looks a lot better. 

Our director, Kevin, is busy building the last five of 32 organ pipes for our pipe organ exhibit.  Once he’s done with the pipes, he’ll be turning his attention to creating a keyboard and windchest.  He says to look for this exhibit in about three months or so.  In the meantime, he’s been trying out the “Drawdio,” a clever device designed by MIT students that measures the resistance of a line of carbon as you draw and translates that resistance to sound.  Unfortunately the Drawdio seems to be sensitive to humidity and has a few other quirks that make it impractical for Mindport. 


Another addition to the Mindport musical menagerie should be out on the floor much sooner than the pipe organ.  AnMorgan is just putting the finishing touches on a table for our new autoharp.  After months of trying to restore a very, very antique -to put it kindly- autoharp, we gave up and found a newer one.  I’m looking forward to having this instrument on the floor for patrons to try, although I will miss the impromptu renditions of popular songs given by Mindport staff.  You really can do quite a bit with three chords and limited inhibitions. 

Music must be on the brain these days.  Exhibits Manager Bill Lee and Public Relations person Karen Weber have been working on finding a way to turn a single piano key mechanism that’s been hanging out here for about three years into an exhibit.  So far they have a gong made out of an old mechanical back-up alarm taken off a truck, the piano key, and a claw.  I have total confidence that these three pieces will make beautiful music together (har).   


I think those are probably the highlights.  We’re also making our usual rounds, cleaning fish tanks, trouble-shooting light fixtures, emptying the recycling, and fixing pieces of exhibits that have succumbed to slightly too vigorous declarations of affection.   I’ll keep continue to keep you posted as to what’s new and exciting. 

Until next time,

Tallie
 
Site Meter